As one of the very first DPF specialists in the UK we now have unmatched knowledge and experience within the DPF industry. We offer a wide range of DPF services, from complete removal to replacement, and of course cleaning which has grown rapidly in popularity over the last few years.
We have no barriers with our cleaning process as it’s a manual process, carried out in situ, and is not governed by a computer guided function. Future DPF regenerations, whether passive or forced, will be more successful following our cleaning service as the soot carrying capabilities are increased.
The Cleaning Procedure
Stage 1: We carry out an in depth diagnostic, checking common failed components before initiating a DPF clean. Where necessary, further investigation is carried to ensure a successful clean.
Stage 2: Using a high pressure injection system, a decarbonising solution is injected into the pre DPF pressure line. A soak period is now initiated. This is then followed by a further injection of solution during an engine speed cycle. The soak period, solution amount and repetition depends on saturation levels identified in stage 1.
Stage 3: Finally, live data is analysed during active road use. This is then followed by final parameter checks logging DPF back pressure readings. These readings, before and after, are then reported back to you for your peace of mind. The three stage DPF cleaning process is now complete.
Advantages of our cleaning process:
- While you wait service
- Pre and post diagnostic checks on common failed components
- No need to remove DPF from vehicle
- Increased efficiency (MPG)
- Increased performance